
Puri-guard® SW 2540 products can replace the Dopunt SW30 2540 membrane, the performance is similar but more money-saved. With its reasonable high flow and rejection are available to meet the water demands of both land and sea based desalinates, especially use for small marine and yacht seawater desalination systems.
Characteristics of SW membrane includes SW30 2540 membrane:
- Thin-Film composite but strictly control its quality.
- Chinese leading SW with good rejection and flow matched SW products.
- Normal 2.5", 4", 8" size, can change in markets brands except patents specialty.
- Durable fiberglass shell to protect membrane itself.
- OEM & ODM is available.

PLS kindly check below points and let us know in order to give you more suitable and right products.
1. Current used brand 2540
2. Performance requests
3. Using condition
4. Face customers group
Pay attention, if you are not willing to inform us above info, we will supply our standard above mentioned products.
Main applications of seawater 2540
Puri-guard® Your Pure Trust
• Produces freshwater from ocean water for boats, yachts, and offshore rigs.
• Compact size allows integration into small marine systems.
• Ideal for islands, remote communities, or small industrial operations.
• Produces potable water from seawater when larger SWRO units are impractical.
• Often paired in arrays of 2–6 membranes to scale output.

• Deployed for disaster relief or military operations where seawater is the only source.
• Lightweight and compact enough for mobile watermakers.
• Provides controlled desalinated seawater for experimental setups or pilot plants.
• Precise flow and salt rejection allow testing of downstream processes.
- High-pressure pump required (800-1000psi);
- Pre-treatment is essential : sediment filter, carbon for chlorine removal , antiscalant ;
- Use seawater-rated membrane housings
- Not compatible with low-pressure brackish systems
Populære tags: sw30 2540 membrane, China sw30 2540 membrane manufacturers, suppliers, factory
|
Puri-guard® |
3/d) |
||||
|
SW-2540 |
680 (2.6) |
800/5.5 |
99.5-99.65 |
32000ppm |
|
8% ± 1.0 recovery
Normal water requirement 1-2m3/d can choose SW30 2540
Single membrane element production flow may vary ±15%.
Effective membrane area will not exceed ±4%.
A stable desalting rate is generally tested after 24-48 hours of continuous operation, depending on the inlet water quality and operating conditions.
Max Operating Pressure: 69 bar (1000psi)
Max. operation Temperature: 45℃ (113℉)
Maximum pressure drop for a single membrane element: 1.0 bar (15psi)
Continuous running pH range: 2-11
Chemical cleaning pH value range: 1-13
Max. feed water SDI15 valve (5.0)
<0.1 ppm

|
Puri-guard® |
A (±2.0mm) |
B (±1.0mm) |
C1 (±1.0mm) |
C2 (±1.0mm) |
D (±0.1mm) |
|
2540 |
1016 |
61 |
30.2 |
30.2 |
19 |








